SnapUp home Grab n Go Nutricup
Take your everyday blending wherever you go with the SnapUp home Grab n Go Nutricup. Designed with a 350ml capacity, rechargeable battery and compact format, this portable blender makes blending more convenient for everyday routines.
Powered by a 40W 3.7V DC motor, the Grab n Go Nutricup uses a high-grade 8-wing stainless steel blade system for blending. Its rechargeable battery supports up to 20 blending cycles on a single charge, while the USB Type-C charging interface makes recharging simple and convenient.
The Nutricup features a leak-proof flip-top sipper lid, allowing you to blend and sip from the same portable cup. Its food-grade BPA-free ABS plastic body is designed with everyday food and beverage use in mind.
For added convenience, the Nutricup includes an auto-stop function that stops automatically after 30 seconds. With approximately 3 hours required for a full charge, Grab n Go Nutricup is made for people who want a practical blending companion that fits easily into an active, on-the-go lifestyle.
Blend. Sip. Go.
350ml Portable Capacity
The 350ml capacity gives the Grab n Go Nutricup a practical portable format for individual blending needs. Its compact cup design makes it convenient to carry as part of your everyday routine.
40W DC Motor
Compact Motor, Everyday Blending
The Grab n Go Nutricup is powered by a 40W, 3.7V DC motor. The motor works with the stainless steel blade system to provide the blending power required by the appliance.
8-Wing Stainless Steel Blade
High-Grade Blade System
The Nutricup features a high-grade 8-wing stainless steel blade system designed for blending. The multi-wing blade configuration works with the 40W motor to support the appliance's blending operation.
Rechargeable & Ready To Go
Up To 20 Blending Cycles Per Charge
The built-in rechargeable battery provides up to 20 blending cycles on a single charge. A full charge takes approximately 3 hours, giving you a convenient rechargeable option for regular use.
Actual performance may vary depending on usage conditions and the contents being blended.
USB Type-C Charging
Simple, Convenient Recharging
The Grab n Go Nutricup features a USB Type-C charging interface for recharging its built-in battery. The approximate full charging time is 3 hours.
Auto-Stop After 30 Seconds
Added Convenience While Blending
The Nutricup comes with an auto-stop function that automatically stops the appliance after 30 seconds. This provides a defined blending cycle without requiring continuous operation.
Leak-Proof Flip-Top Sipper Lid
Blend & Sip From One Cup
The Grab n Go Nutricup features a leak-proof flip-top sipper lid, combining portability and convenience in one design. The lid is designed to help prevent leakage during everyday carrying and allows convenient sipping.
Food-Grade BPA-Free ABS Body
Designed For Everyday Food & Beverage Use
The Nutricup features a food-grade, BPA-free ABS plastic body, providing a practical body material for an appliance designed for blending beverages and food preparations.
Product Details
Safety Regulations
Before Using Your Grab n Go Nutricup
- Read the product instructions carefully before first use.
- Ensure the blade assembly and lid are correctly positioned before operating the Nutricup.
- Do not operate the blender without the required contents inside the cup.
- Do not touch the stainless steel blades while they are moving.
- Keep fingers, utensils and other objects away from the blade assembly during operation.
- Do not open or interfere with the blade assembly while the motor is running.
- Do not exceed the 350ml cup capacity.
- Make sure the flip-top sipper lid is properly closed before carrying the Nutricup.
- Keep the charging interface dry during charging and do not operate the appliance if the charging connection is damaged.
- Use the USB Type-C charging interface as intended and allow the appliance to charge fully before extended use.
- Do not immerse the motor/electrical section in water.
- Keep the appliance away from children when not in use.
- Stop using the appliance if you notice damage to the body, lid, blade assembly, charging interface or other components.
- Allow the appliance to stop automatically after its 30-second operating cycle before starting another cycle, as appropriate for the preparation.
- Clean the appliance according to the supplied product instructions and ensure components are dry before storage or charging.
Important
The 30-second auto-stop function is a product feature. It should not be treated as a substitute for safe operation or supervision.
How To Use
1. Charge The Nutricup
Connect the Nutricup to a suitable power source using its USB Type-C charging interface. A full charge takes approximately 3 hours.
2. Prepare Your Ingredients
Add the ingredients suitable for your preparation into the 350ml cup. Do not exceed the cup's stated capacity.
3. Secure The Lid
Ensure the lid and blending assembly are properly secured before starting the appliance.
4. Start Blending
Operate the Nutricup according to the supplied instructions. The appliance has a 30-second auto-stop function.
5. Check The Blend
Once the cycle stops, check the consistency of your preparation. If another cycle is required, operate the appliance again according to the product instructions.
6. Sip & Go
Once blending is complete and the appliance has stopped, use the flip-top sipper lid for convenient sipping.
Charging & Battery
The Grab n Go Nutricup features a rechargeable battery and a USB Type-C charging interface.
- Approximate full charging time: 3 hours
- Performance: up to 20 blending cycles per charge
- Charging interface: USB Type-C
- Motor: 40W, 3.7V DC
The stated number of blending cycles is a rated performance figure and may vary depending on usage and preparation conditions.
Cleaning & Maintenance
- Switch off the appliance before cleaning.
- Do not handle the blade assembly while it is moving.
- Clean the food-contacting components after use.
- Use appropriate cleaning methods according to the supplied user manual.
- Keep the charging interface and electrical components dry.
- Do not immerse electrical components in water.
- Allow components to dry properly before reassembly, storage or charging.
- Do not use the appliance if any component is damaged.
FAQs
What is the capacity of the SnapUp home Grab n Go Nutricup?
The SnapUp home Grab n Go Nutricup has a 350ml capacity, making it a compact portable blender designed for individual blending requirements.
Is the Grab n Go Nutricup rechargeable?
Yes. The Grab n Go Nutricup has a built-in rechargeable battery, allowing it to be used without being continuously connected to a power source during blending.
How do you charge the SnapUp Grab n Go Nutricup?
The Nutricup uses a USB Type-C charging interface. Connect the appliance to a suitable power source using the USB Type-C connection to recharge its battery.
How long does the Grab n Go Nutricup take to charge?
A full charge takes approximately 3 hours.
How many blending cycles can the Nutricup provide on one charge?
The Grab n Go Nutricup is rated for up to 20 blending cycles on a single charge. Actual performance may vary depending on usage and the contents being blended.
What is the motor power of the Grab n Go Nutricup?
The Grab n Go Nutricup uses a 40W, 3.7V DC motor designed to provide the power required for its blending operation.
What type of blades does the Nutricup use?
The Nutricup features a high-grade 8-wing stainless steel blade system designed for its blending operation.
Does the Grab n Go Nutricup have an auto-stop function?
Yes. The Nutricup has a 30-second auto-stop function that automatically stops the appliance after 30 seconds of operation.
The Nutricup's automatic operating cycle runs for 30 seconds before the auto-stop function stops the appliance.
Is the Grab n Go Nutricup made from BPA-free material?
Yes. The Nutricup has a food-grade BPA-free ABS plastic body.
Is the blade of the SnapUp Nutricup made from stainless steel?
Yes. The Grab n Go Nutricup uses a high-grade 8-wing stainless steel blade system.
What is the difference between a portable blender and the Grab n Go Nutricup?
The Grab n Go Nutricup combines a 350ml blending cup, rechargeable battery, 40W DC motor, stainless steel 8-wing blade and sipper lid in one portable appliance, allowing blending without being continuously connected to a power supply.
What should I do if the Nutricup stops after 30 seconds?
The 30-second auto-stop is a built-in product function. Once the cycle has stopped, check the preparation and follow the product instructions if another blending cycle is required press the start button to start the second cycle if needed.
How do I clean the Grab n Go Nutricup?
Switch off the Nutricup before cleaning and clean the appropriate food-contacting components according to the supplied instructions. Keep the charging interface and electrical components dry and never immerse electrical components in water.
Is the Grab n Go Nutricup suitable for everyday use?
The Nutricup is designed for everyday portable blending, with a 350ml capacity, 40W motor, rechargeable battery, up to 20 blending cycles per charge and 30-second auto-stop function.
What makes the SnapUp Grab n Go Nutricup convenient for travel or on-the-go use?
Its 350ml portable format, rechargeable battery, USB Type-C charging, flip-top sipper lid and up to 20 blending cycles per charge make the Nutricup designed for convenient everyday use on the go.
What is included with the Grab n Go Nutricup?
The product consists of the Grab n Go Nutricup portable blender with its blending cup, rechargeable system, 8-wing stainless steel blade system and leak-proof flip-top sipper lid and a charging cable.
Is there a warranty for the Grab n Go Nutricup? How do I claim warranty?
The product comes with a 1-year warranty on electrical components against manufacturing defects. Please note that plastic parts are not covered under warranty for regular wear and tear, and the warranty is only valid for domestic use.