• 25W Powerful Surround Sound: Enjoy powerful audio for your favourite music.
• Bluetooth 5.3: Wireless connectivity with compatible devices.
• 78mm Speaker Driver: Designed for powerful sound output.
• Super High Bass: Bass-focused listening experience.
• Multiple Playback Options: Bluetooth, TF card, FM radio and USB.
• TWS – Double Impact: Pair with a compatible speaker for a wider listening experience.
• RGB Lights: Nine RGB lighting reflections.
• Type-C Charging Port: Convenient charging connection.
• Up to 7 Hours Playtime: Based on 60% volume with RGB lighting switched off.
• Integrated Controls: Manage playback, volume, modes and lighting using the speaker buttons.
• Sweat and Dust Resistance: As specified for the product; no formal IP rating provided.
• Up to 75 Hours Standby: Standby time as specified.
• Charging Time: Up to 3 hours.
• Material: ABS.

Note: Actual playtime may vary depending on volume, RGB lighting and usage conditions.

How to Set Up Your SnapUp Groove Wave Speaker

1. Power On and Power Off

• Power ON: Long-press the Power Key.
• Power OFF: Long-press the Power Key again.

2. Connect via Bluetooth

1. Switch on the speaker using the Power Key.
2. Enable Bluetooth on your smartphone or compatible device.
3. Open the list of available Bluetooth devices.
4. Select Groove Wave or the speaker name displayed on your device.
5. Once connected, start playing music from your device.

If the speaker does not appear in the Bluetooth list, check that it is powered on and available for pairing. Disconnect any previously connected device if necessary, then try again.

3. Play Music

Use the integrated buttons to play or pause music, change tracks, adjust volume and switch between playback modes.

How to Use the Different Playback Modes

Bluetooth Mode

1. Switch on the speaker.
2. Enable Bluetooth on your phone.
3. Select Groove Wave from the available devices.
4. Play music from your preferred app.

TF Card Mode

Insert a compatible TF card containing supported audio files into the TF card slot. Use the M/RGB Button to switch to the appropriate mode.

USB Mode

Connect a compatible USB storage device to the USB Read Slot to play supported audio files. Use the M/RGB Button to switch playback modes as needed.

FM Radio Mode

1. Switch the speaker to FM mode using the M/RGB Button.
2. Double-press the Power Button to search for FM channels, according to the supplied control guide.
3. Use the Plus Button to move to the next FM channel.
4. Use the Minus Button to move to the previous FM channel.

TWS Mode – Double Impact

Groove Wave supports TWS pairing with a compatible speaker.

1. Switch on the compatible speakers.
2. Double-press the Power Key to activate TWS, as specified for this model.
3. Follow the speaker's pairing response to complete the connection.

Confirm the exact TWS pairing sequence with the production unit before publishing detailed pairing instructions.

RGB Lighting

Groove Wave features nine RGB lighting reflections. Press and hold the M/RGB Key for approximately one second to change the lighting effect, according to the supplied control guide.

Charging Your SnapUp Groove Wave Speaker

1. Connect a compatible charging cable to the Type-C charging port.
2. Connect the cable to a suitable USB power source.
3. Check the indicator light to monitor charging.
4. Allow the speaker to charge fully before disconnecting it.

Charging time: Up to 3 hours.

Battery and Playback Tips

• For the specified playtime of up to 7 hours, use the speaker at around 60% volume with RGB lighting switched off.
• Higher volume and RGB lighting may reduce playback time.
• Charge the speaker using the Type-C charging port.
• Disconnect the charging cable after charging is complete.
• Store the speaker in a clean, dry place when not in use.

Care and Maintenance

• Clean the speaker gently with a soft, dry cloth.
• Keep the charging port free from dust and moisture.
• Avoid exposing the speaker to excessive moisture.
• Do not immerse the speaker in water.
• Store it safely when not in use.

Troubleshooting Guide

The Speaker Is Not Turning On

• Check that the speaker has sufficient charge.
• Use the Power Key according to the operating instructions.
• Connect the charging cable and check whether the red charging light glows.
• Try switching the speaker on again after charging.

Bluetooth Is Not Connecting

• Ensure Bluetooth is enabled on your phone.
• Make sure the speaker is switched on.
• Select Groove Wave from the available Bluetooth devices list.
• Disconnect any previously connected device and try pairing again.

No Sound Is Coming from the Speaker

• Check the volume on both the speaker and your connected device.
• Confirm that the correct playback mode is selected.
• Ensure the audio source is playing.
• Reconnect your Bluetooth device or try another supported playback source.

FM Radio Is Not Finding Channels

• Switch to FM mode.
• Double-press the Power Button to search for channels, as specified in the control guide.
• Use the Plus and Minus Buttons to navigate available FM channels.

The Speaker Is Not Charging

• Check that the Type-C cable is connected securely.
• Try a compatible charging cable and power source.
• Check whether the red charging indicator glows.
• If the issue continues, contact SnapUp support.

RGB Lights Are Not Changing

• Ensure the speaker is switched on.
• Press and hold the M/RGB Key for approximately one second.
• If the lights remain unresponsive, contact SnapUp support.

TWS Pairing Is Not Working

• Ensure both speakers support TWS.
• Keep both speakers switched on and close to each other.
• Try the specified double-press action on the Power Key.
• If pairing still fails, check the model-specific instructions.

Control verification note: The supplied table assigns long-press actions to both Power ON and Power OFF, and lists a single press of the Power Key for Play/Pause. Confirm the exact operating sequence on the production model before publishing this as the final user manual.